As you know, the kits shipped so far had the 23.81 mm (15/16″) nylon spacers replaced with 19.05 mm (3/4″) spacers plus three 1.58 mm (1/16″) washers to make up the correct length. The 23.81 mm spacers are due to arrive tomorrow, and I will post them to the eShapeOko owners, in case they want to mount their Y motors the right way.
I’m still looking for ideas for belt clamps, by the way. I’m not very satisfied with the zip ties. The clamps need to be fairly cheap to have made, or very easy for us to make them ourselves.