Difference between revisions of "EShapeoko 1.2 Assembly: V-wheels"

From Amber Spyglass Ltd
Jump to: navigation, search
(Created page with "{{Dual-bearing V-wheel Assembly}} Repeat 16 times (single X rail) or 20 times (dual X rail). == Go To == * Next step: [[EShapeoko 1.2 Assembly: smooth idler wheels|smooth id...")
 
(Go To)
Line 4: Line 4:
  
 
== Go To ==
 
== Go To ==
* Next step: [[EShapeoko 1.2 Assembly: smooth idler wheels|smooth idler wheels]]
+
* Next step: [[EShapeoko 1.2 Assembly: Smooth idler wheels|smooth idler wheels]]
* Previous step: [[EShapeoko 1.2 Assembly: prep work|prep work]]
+
* Previous step: [[EShapeoko 1.2 Assembly: Prep work|prep work]]
 +
* Back to [[EShapeoko 1.2 Assembly Instructions|assembly top page]]

Revision as of 18:42, 11 June 2014

EShapeOko assembly step 01 V-wheel 1.png

Item Part Number Part Description Count
For each wheel
1 MW1 V-wheel sleeve 1
2 G5 5 × 16 × 5 mm bearing 2
3 W5Pa 5 mm precision washer 1

Lay one bearing on a flat surface. Push a V-wheel sleeve over it. The parts are designed to force-fit, so push firmly straight down. Thread this on a long M5 bolt, bearing side first, followed by a precision washer and the second bearing. Place the second bearing on a flat surface, and push the V-wheel sleeve over it too. Make sure both bearings are in as far as they will go. Remove the bolt.

If the V-wheel does not rotate smoothly, see Troubleshooting.

EShapeOko assembly step 01 V-wheel 2.png

Repeat 16 times (single X rail) or 20 times (dual X rail).

Go To