EShapeoko 1.3 Assembly: Z leadscrew

From Amber Spyglass Ltd
Revision as of 15:48, 28 January 2016 by Admin (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Preliminary instructions

You need some the parts in Pack 8, and the Z motor mount plate from Pack 6, with two holes tapped M5.

Identify the one smaller washer in Pack 8, and set it aside. That's part W5D; the other washers are part W5.

Using the two 8 mm M5 screws (S5-8, shortest in the pack) with one washer (W5) each, attach the bearing block (G8K) to the motor plate (LZP2 or LZP3).

Go To