Hardware for eShapeoko belt configurations E and F

Hardware for eShapeoko belt configurations E and F
  • Click to enlarge
  • Click to enlarge
  • Click to enlarge
  • Click to enlarge

£6.15

This product is currently out of stock


Product Information
Specification

This is a kit of all the parts needed to install two NEMA23 motors on the Y axis of an eShapeoko in belt configurations E and F (NEMA23 motors with belts on top of the rail).

Please note that this assumes you already have the parts for belt configuration D (which are supplied with the kit, if you selected NEMA23 for the Y axis).  These are only the additional parts needed to switch from NEMA23 with belts-on-the-outside to the more compact belts-on-top configuration.  In other words, if you bought your eShapeoko kit with hardware for NEMA17 motors on the Y axis, and now would like to install NEMA23 motors, these parts won't be enough: you'll need this upgrade kit too.

You should already have these parts for the X axis, except the S5-16F screw (bottom motor screw in configuration F).  One extra is included for this purpose.

Contents

  • 4 × D5-04b — M5 6.35 mm aluminium spacer
  • 8 × D5-02a — M5 3.18mm spacer (thick)
  • 32 × W5 — M5 washer (form A)
  • 8 × S5-18 — M5 18mm cap screw
  • 3 × S5-16F — M5 16mm flanged screw
  • 4 × S5-30F — M5 30mm flanged screw

 

Images are for illustration only, and show some items not included in this product.

 

Product Code K-BEF
Manufacturer A/S/L
Condition New
Weight 0.010kg

This field is required.
Top

Copyright ©2012-2017 Amber Spyglass Ltd. All rights reserved.

Follow Us

Mailing List

Enter your e-mail address to receive our newsletter
Please enter a valid email address.
Email address already subscribed.

Copyright ©2012-2017 Amber Spyglass Ltd. All rights reserved.

eCommerce by CubeCart