Stepper motor, NEMA17, 1.8° per step, 2.5 A, 4800 g·cm

Stepper motor, NEMA17, 1.8° per step, 2.5 A, 4800 g·cm
  • Click to enlarge

£15.45


Product Information
Specification

A powerful bipolar (4-wire) NEMA17 stepper motor with 200 steps per revolution (1.8 degrees per step).  This is one of the most powerful NEMA17 motors, with a holding torque of 4800 g·cm (0.47 N·m, 67 oz·in).  It has a current rating of 2.5 A, which is ideal for drivers based on the TB6560, TB6600 and similar chips.  It also works with small drivers such as the Allegro A4983 and A4988, and Texas Instruments DRV8811, DRV8818 and DRV8825, as found on Pololu and StepStick driver modules, and on boards such as gShield/grblShield and TinyG.  However, these smaller drivers will not achieve the full rated torque.  This is our fastest motor (due to its low impedance), and it's a good match for the Shapeoko and eShapeoko.  We also stock a 0.9° motor of the same size, a smaller and lighter 1.8° motor, and the same size motor rated at 1.7 A.

Technical Specifications

Form factor: NEMA17

Motor length: 48 mm

Motor weight: 340 g

Shaft diameter: 5 mm

Step angle: 1.8°
Rated current: 2.5 A
Rated voltage: 3.1 V
Phase resistance: 1.25 ohm
Phase inductance: 1.8 mH
Holding torque: 4800 g·cm (0.47 N·m, 67 oz·in)
Rotor inertia: 68 g·cm2
Detent torque: 280 g·cm
Wiring: bipolar (4-wire)

 

Product Code M4-D25L
Condition New
Weight 0.400kg

This field is required.
Top

Copyright ©2012-2017 Amber Spyglass Ltd. All rights reserved.

Follow Us

Mailing List

Enter your e-mail address to receive our newsletter
Please enter a valid email address.
Email address already subscribed.

Copyright ©2012-2017 Amber Spyglass Ltd. All rights reserved.

eCommerce by CubeCart