Belt pulley, 20 tooth, 0.25in (6.35mm) bore, for 9mm wide GT2 belt

Belt pulley, 20 tooth, 0.25in (6.35mm) bore, for 9mm wide GT2 belt
  • Click to enlarge
  • Click to enlarge
  • Click to enlarge

£6.95


Product Information
Specification

An all-aluminium timing belt pulley for GT2 belt (2 mm pitch) 9 mm wide (belt up to 10 mm wide can be used).

This pulley has 20 teeth and a 0.25" (6.35 mm) bore.  This is the shaft diameter of a typical NEMA 23 motor.  The toothed belt engagement area is 11 mm wide, to accommodate a small amount of belt misalignment when used with 9 mm belt.

It has two M3 grub screws (at 90° to each other), which require a 1.5 mm hex key (Allen key).  The pulley is 21 mm long overall, has a 16 mm diameter hub, and a flange at the opposite end.  Unlike rubbish aluminium pulleys often found on eBay, which have a flat flange than can chafe the belt, this is a well-made pulley, with an embossed flange, slightly rounded on the side facing the belt, and the hub is also chamfered.  It is made to our requirements, with a slightly wider belt area than typical 9 mm belt pulleys.

Product Code P2A-20-6
Manufacturer A/S/L
Condition New
Weight 0.009kg

This field is required.
Top

Copyright ©2012-2017 Amber Spyglass Ltd. All rights reserved.

Follow Us

Mailing List

Enter your e-mail address to receive our newsletter
Please enter a valid email address.
Email address already subscribed.

Copyright ©2012-2017 Amber Spyglass Ltd. All rights reserved.

eCommerce by CubeCart