Dual-bearing V-wheel Assembly
Revision as of 20:17, 30 September 2013 by Admin (talk | contribs) (Created page with "File:EShapeOko_assembly_step_01_V-wheel_1.png {| class="wikitable" |- !Item !Part Number !Part Description !Count |- !colspan="4"|''For each wheel...")
Item | Part Number | Part Description | Count |
---|---|---|---|
For each wheel | |||
1 | EM-MW1 | V-wheel sleeve | 1 |
2 | EM-G5 | 5 x 16 x 5mm bearing | 2 |
3 | EM-W5P | 5mm precision washer | 1 |
Lay one bearing on a flat surface. Push a V-wheel sleeve over it. The parts are designed to force-fit, so push firmly straight down. Thread this on a long M5 bolt, bearing side first, followed by a precision washer and the second bearing. Place the second bearing on a flat surface, and push the V-wheel sleeve over it too. Make sure both bearings are in as far as they will go. Remove the bolt.
Please see V-wheel and Idler Assembly Instructions#Troubleshooting if the wheels don't rotate smoothly.