Dual-bearing V-wheel Assembly

From Amber Spyglass Ltd
Revision as of 21:17, 30 September 2013 by Admin (talk | contribs) (Created page with "File:EShapeOko_assembly_step_01_V-wheel_1.png {| class="wikitable" |- !Item !Part Number !Part Description !Count |- !colspan="4"|''For each wheel...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

EShapeOko assembly step 01 V-wheel 1.png

Item Part Number Part Description Count
For each wheel
1 EM-MW1 V-wheel sleeve 1
2 EM-G5 5 x 16 x 5mm bearing 2
3 EM-W5P 5mm precision washer 1

Lay one bearing on a flat surface. Push a V-wheel sleeve over it. The parts are designed to force-fit, so push firmly straight down. Thread this on a long M5 bolt, bearing side first, followed by a precision washer and the second bearing. Place the second bearing on a flat surface, and push the V-wheel sleeve over it too. Make sure both bearings are in as far as they will go. Remove the bolt.

EShapeOko assembly step 01 V-wheel 2.png

Please see V-wheel and Idler Assembly Instructions#Troubleshooting if the wheels don't rotate smoothly.