Difference between revisions of "EShapeoko 1.0 and 1.1 Mechanical Kit Parts List"
(34 intermediate revisions by the same user not shown) | |||
Line 1: | Line 1: | ||
− | + | This list is a little out of date and incomplete. It is valid for versions 1.0 and | |
+ | 1.1, but it does not cover all the options available in version 1.1. | ||
− | This is the extended length kit, | + | Here's |
+ | [http://blog.amberspyglass.co.uk/2014/06/15/eshapeoko-packing-list-2/eshapeoko-v1-2-packing-list/ an up-to-date packing list for version 1.2] (the current version). | ||
+ | |||
+ | Here's [http://blog.amberspyglass.co.uk/2013/12/20/eshapeoko-packing-list/eshapeoko-v1-1-packing-list/ the same type of list for version 1.1]. | ||
+ | |||
+ | |||
+ | __TOC__ | ||
+ | |||
+ | == Dual-Y option == | ||
+ | |||
+ | This is the extended length kit, with the dual-Y option selected. | ||
{| class="wikitable" | {| class="wikitable" | ||
Line 49: | Line 60: | ||
| | | | ||
|- | |- | ||
− | | | + | |3 |
|EM-LBT | |EM-LBT | ||
|Belt tensioner | |Belt tensioner | ||
Line 55: | Line 66: | ||
| | | | ||
|tap hole M5 | |tap hole M5 | ||
+ | |- | ||
+ | |12 | ||
+ | |EM-LBC | ||
+ | |Belt clamp | ||
+ | |1mm stainless steel | ||
+ | | | ||
+ | | | ||
|- | |- | ||
|2 | |2 | ||
Line 64: | Line 82: | ||
|- | |- | ||
|2 | |2 | ||
− | |EM- | + | |EM-LTS |
|Spindle strap | |Spindle strap | ||
|1.5mm stainless steel | |1.5mm stainless steel | ||
Line 114: | Line 132: | ||
| | | | ||
|- | |- | ||
− | | | + | |6 |
|EM-MW2 | |EM-MW2 | ||
|Smooth idler wheel sleeve | |Smooth idler wheel sleeve | ||
Line 121: | Line 139: | ||
| | | | ||
|- | |- | ||
− | | | + | |3 |
|EM-BP5 | |EM-BP5 | ||
|18-tooth MXL pulley 5mm bore | |18-tooth MXL pulley 5mm bore | ||
Line 133: | Line 151: | ||
|neoprene, glass fiber, nylon | |neoprene, glass fiber, nylon | ||
|(MSK01-10) | |(MSK01-10) | ||
− | | | + | |6mm or 6.35mm depending on availability |
|- | |- | ||
− | | | + | |2 |
|EM-B-700 | |EM-B-700 | ||
|700mm 6.35mm MXL belt | |700mm 6.35mm MXL belt | ||
|neoprene, glass fiber, nylon | |neoprene, glass fiber, nylon | ||
|(MSK01-10) | |(MSK01-10) | ||
− | | | + | |6mm or 6.35mm depending on availability |
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
|- | |- | ||
− | | | + | |22 |
|EM-W5P | |EM-W5P | ||
|5mm precision washer | |5mm precision washer | ||
Line 156: | Line 167: | ||
| | | | ||
|- | |- | ||
− | | | + | |44 |
|EM-G5 | |EM-G5 | ||
|5 x 16 x 5mm bearing | |5 x 16 x 5mm bearing | ||
Line 186: | Line 197: | ||
!colspan="6"|''Spacers'' | !colspan="6"|''Spacers'' | ||
|- | |- | ||
− | | | + | |9 |
|EM-W3N | |EM-W3N | ||
|M3 1.58mm washer | |M3 1.58mm washer | ||
Line 200: | Line 211: | ||
| | | | ||
|- | |- | ||
− | | | + | |6 |
|EM-D3-12 | |EM-D3-12 | ||
|M3 19.05mm spacer | |M3 19.05mm spacer | ||
Line 208: | Line 219: | ||
|- | |- | ||
|8 | |8 | ||
− | |EM-D5- | + | |EM-D3-15 |
− | |M5 6.35mm spacer | + | |M3 23.81mm spacer |
+ | |nylon | ||
+ | | | ||
+ | |see note for substitution | ||
+ | |- | ||
+ | |8 | ||
+ | |EM-D5-04a | ||
+ | |M5 6.35mm spacer (thick) | ||
|nylon | |nylon | ||
− | |SM-H01 | + | |(SM-H01) |
| | | | ||
|- | |- | ||
− | | | + | |8 |
|EM-D5-12 | |EM-D5-12 | ||
|M5 19.05mm spacer | |M5 19.05mm spacer | ||
|nylon | |nylon | ||
|SM-H02 | |SM-H02 | ||
− | | | + | |for spindle mount |
+ | |- | ||
+ | |4 | ||
+ | |EM-D5-12a | ||
+ | |M5 19.05mm spacer (thick) | ||
+ | |nylon | ||
+ | |(SM-H02) | ||
+ | |for X carriage | ||
|- | |- | ||
|4 | |4 | ||
− | |EM-D5- | + | |EM-D5-16a |
− | |M5 25.4mm spacer | + | |M5 25.4mm spacer (thick) |
|nylon | |nylon | ||
| | | | ||
Line 230: | Line 255: | ||
!colspan="6"|''Fasteners'' | !colspan="6"|''Fasteners'' | ||
|- | |- | ||
− | | | + | |15 |
|EM-W3 | |EM-W3 | ||
|M3 washer (form A) | |M3 washer (form A) | ||
Line 237: | Line 262: | ||
| | | | ||
|- | |- | ||
− | | | + | |4 |
− | |EM-S3- | + | |EM-S3-6 |
− | |M3 | + | |M3 6mm cap screw |
|stainless steel | |stainless steel | ||
− | | | + | | |
| | | | ||
|- | |- | ||
− | | | + | |8 |
|EM-S3-30 | |EM-S3-30 | ||
|M3 30mm cap screw | |M3 30mm cap screw | ||
Line 258: | Line 283: | ||
| | | | ||
|- | |- | ||
− | | | + | |38 |
|EM-N5 | |EM-N5 | ||
|M5 hex nut | |M5 hex nut | ||
Line 272: | Line 297: | ||
| | | | ||
|- | |- | ||
− | | | + | |122 |
|EM-W5 | |EM-W5 | ||
|M5 washer (form A) | |M5 washer (form A) | ||
Line 279: | Line 304: | ||
| | | | ||
|- | |- | ||
− | | | + | |8 |
+ | |EM-W5B | ||
+ | |M5 washer (form B) | ||
+ | |stainless steel | ||
+ | | | ||
+ | |spare; see instructions | ||
+ | |- | ||
+ | |18 | ||
|EM-S5-10 | |EM-S5-10 | ||
|M5 10mm cap screw | |M5 10mm cap screw | ||
Line 286: | Line 318: | ||
| | | | ||
|- | |- | ||
− | | | + | |19 |
|EM-S5-14 | |EM-S5-14 | ||
|M5 14mm cap screw | |M5 14mm cap screw | ||
Line 300: | Line 332: | ||
| | | | ||
|- | |- | ||
− | | | + | |14 |
|EM-S5-30 | |EM-S5-30 | ||
|M5 30mm cap screw | |M5 30mm cap screw | ||
Line 328: | Line 360: | ||
| | | | ||
|- | |- | ||
− | | | + | |4 |
− | |EM- | + | |EM-BKT1 |
− | | | + | |Angle bracket |
− | | | + | |zinc-plated steel |
+ | | | ||
+ | | | ||
+ | |- | ||
+ | |8 | ||
+ | |EM-WS4-16 | ||
+ | |4mm x 16mm wood screw | ||
+ | |zinc-plated steel | ||
| | | | ||
| | | | ||
|} | |} | ||
− | The ''Equivalent Parts'' column lists the part number of the equivalent part of the original | + | The ''Equivalent Parts'' column lists the part number of the equivalent part of the original Shapeoko (in parentheses if the parts are similar in form or function, but not identical). The few B''nnnnn'' part numbers are Buildlog.net part numbers. |
+ | |||
+ | Note that, in early kits, EM-D3-15 (15/16" spacer) was substituted with one EM-D3-12 (3/4" spacer) plus 3 × EM-W3N (1/16" washer) due to long lead time on the EM-D3-15. | ||
+ | |||
+ | Kits delivered before March 2013 have regular nylon spacers (EM-D5-04, EM-D5-12, EM-D5-16) throughout. From March 2013 onwards, X carriage spacers are thicker (EM-D5-04a, EM-D5-12a, EM-D5-16a), for added rigidity. | ||
What is not in the kit: | What is not in the kit: | ||
− | * | + | * Four NEMA17 stepper motors; |
* Electronics to drive the motors; | * Electronics to drive the motors; | ||
* A waste board to mount the machine on (minimum size: 550mm x 420mm). | * A waste board to mount the machine on (minimum size: 550mm x 420mm). | ||
− | + | == Single-Y option == | |
− | + | The Single-Y option removes the parts needed to add a second Y motor. | |
+ | Please note that this is not a recommended configuration. Dual-Y | ||
+ | drive is strongly recommended. We offer the single Y for those | ||
+ | who want to implement their own dual Y drive solution (for example, | ||
+ | using a driveshaft rather than two motors). | ||
− | + | This is a list of the parts not included in the single-Y configuration. | |
{| class="wikitable" | {| class="wikitable" | ||
Line 357: | Line 404: | ||
!Equivalent Parts | !Equivalent Parts | ||
!Notes | !Notes | ||
+ | |- | ||
+ | !colspan="6"|''Custom laser-cut parts'' | ||
+ | |- | ||
+ | |−1 | ||
+ | |EM-LBT | ||
+ | |Belt tensioner | ||
+ | |4mm aluminium | ||
+ | | | ||
+ | |tap hole M5 | ||
+ | |- | ||
+ | |−4 | ||
+ | |EM-LBC | ||
+ | |Belt clamp | ||
+ | |1mm stainless steel | ||
+ | | | ||
+ | | | ||
|- | |- | ||
!colspan="6"|''Linear motion components'' | !colspan="6"|''Linear motion components'' | ||
|- | |- | ||
− | |2 | + | |−2 |
|EM-MW2 | |EM-MW2 | ||
|Smooth idler wheel sleeve | |Smooth idler wheel sleeve | ||
Line 367: | Line 430: | ||
| | | | ||
|- | |- | ||
− | |1 | + | |−1 |
|EM-BP5 | |EM-BP5 | ||
|18-tooth MXL pulley 5mm bore | |18-tooth MXL pulley 5mm bore | ||
Line 374: | Line 437: | ||
| | | | ||
|- | |- | ||
− | |1 | + | |−1 |
|EM-B-700 | |EM-B-700 | ||
|700mm 6.35mm MXL belt | |700mm 6.35mm MXL belt | ||
|neoprene, glass fiber, nylon | |neoprene, glass fiber, nylon | ||
|(MSK01-10) | |(MSK01-10) | ||
− | | | + | |6mm or 6.35mm depending on availability |
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
|- | |- | ||
− | |2 | + | |−2 |
|EM-W5P | |EM-W5P | ||
|5mm precision washer | |5mm precision washer | ||
Line 395: | Line 451: | ||
| | | | ||
|- | |- | ||
− | |4 | + | |−4 |
|EM-G5 | |EM-G5 | ||
|5 x 16 x 5mm bearing | |5 x 16 x 5mm bearing | ||
Line 404: | Line 460: | ||
!colspan="6"|''Spacers'' | !colspan="6"|''Spacers'' | ||
|- | |- | ||
− | |4 | + | |−4 |
− | |EM-D3- | + | |EM-D3-15 |
− | |M3 | + | |M3 23.81mm spacer |
|nylon | |nylon | ||
| | | | ||
− | | | + | |see note for substitution |
|- | |- | ||
!colspan="6"|''Fasteners'' | !colspan="6"|''Fasteners'' | ||
|- | |- | ||
− | | | + | |−4 |
|EM-W3 | |EM-W3 | ||
|M3 washer (form A) | |M3 washer (form A) | ||
Line 420: | Line 476: | ||
| | | | ||
|- | |- | ||
− | | | + | |−4 |
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
|EM-S3-30 | |EM-S3-30 | ||
|M3 30mm cap screw | |M3 30mm cap screw | ||
Line 434: | Line 483: | ||
| | | | ||
|- | |- | ||
− | |2 | + | |−2 |
|EM-N5 | |EM-N5 | ||
|M5 hex nut | |M5 hex nut | ||
Line 441: | Line 490: | ||
| | | | ||
|- | |- | ||
− | |6 | + | |−6 |
|EM-W5 | |EM-W5 | ||
|M5 washer (form A) | |M5 washer (form A) | ||
Line 448: | Line 497: | ||
| | | | ||
|- | |- | ||
− | |1 | + | |−4 |
+ | |EM-S5-10 | ||
+ | |M5 10mm cap screw | ||
+ | |stainless steel | ||
+ | | | ||
+ | | | ||
+ | |- | ||
+ | |−1 | ||
|EM-S5-14 | |EM-S5-14 | ||
|M5 14mm cap screw | |M5 14mm cap screw | ||
Line 455: | Line 511: | ||
| | | | ||
|- | |- | ||
− | |2 | + | |−2 |
|EM-S5-30 | |EM-S5-30 | ||
|M5 30mm cap screw | |M5 30mm cap screw | ||
Line 465: | Line 521: | ||
== Short Kit == | == Short Kit == | ||
− | The ''Original Length'' option gives you the same length of MakerSlide on Y as on X, which is the standard configuration of the original | + | The ''Original Length'' option gives you the same length of MakerSlide on Y as on X, |
+ | which is the standard configuration of the original Shapeoko. The two EM-R-495 are | ||
+ | replaced by two more EM-R-375, and the two (or one, if single Y) EM-B-700 by two | ||
+ | (or one) additional EM-B-580. | ||
The minimum size of the waste board for the short machine is 430mm x 420mm. | The minimum size of the waste board for the short machine is 430mm x 420mm. | ||
+ | |||
+ | == Dual X Kit == | ||
+ | |||
+ | This option allows you to build a deeper X carriage with eight V-wheels instead of four, | ||
+ | which runs on two back-to-back MakerSlide rails. It gives additional rigidity, | ||
+ | and it is a good upgrade to have for a heavy spindle. | ||
+ | |||
+ | The dual-X option with no extra rail includes everything below except the EM-R-375 | ||
+ | (375mm MakerSlide), so you need your own rail. | ||
+ | |||
+ | {| class="wikitable" | ||
+ | |- | ||
+ | !Count | ||
+ | !Part Number | ||
+ | !Part Description | ||
+ | !Material | ||
+ | !Equivalent Parts | ||
+ | !Notes | ||
+ | |- | ||
+ | !colspan="6"|''Linear motion components'' | ||
+ | |- | ||
+ | | +1 | ||
+ | |EM-R-375 | ||
+ | |375mm MakerSlide | ||
+ | |extruded aluminium | ||
+ | |MKS01-02 | ||
+ | |tap end holes M5 (both ends) | ||
+ | |- | ||
+ | | +2 | ||
+ | |EM-MES | ||
+ | |Eccentric spacer | ||
+ | |stainless steel | ||
+ | |MSK01-04, B18001 | ||
+ | | | ||
+ | |- | ||
+ | | +4 | ||
+ | |EM-MW1 | ||
+ | |V-wheel sleeve | ||
+ | |machined acetal | ||
+ | |MSK01-05, B17021 | ||
+ | | | ||
+ | |- | ||
+ | | +4 | ||
+ | |EM-W5P | ||
+ | |5mm precision washer | ||
+ | |stainless steel | ||
+ | |MSK01-08 | ||
+ | | | ||
+ | |- | ||
+ | | +8 | ||
+ | |EM-G5 | ||
+ | |5 x 16 x 5mm bearing | ||
+ | |chrome steel | ||
+ | |MSK01-07 | ||
+ | | | ||
+ | |- | ||
+ | !colspan="6"|''Spacers'' | ||
+ | |- | ||
+ | |−4 | ||
+ | |EM-D5-04a | ||
+ | |M5 6.35mm spacer (thick) | ||
+ | |nylon | ||
+ | | | ||
+ | |needed only for single X | ||
+ | |- | ||
+ | |−4 | ||
+ | |EM-D5-12a | ||
+ | |M5 19.05mm spacer (thick) | ||
+ | |nylon | ||
+ | | | ||
+ | |needed only for single X | ||
+ | |- | ||
+ | | +8 | ||
+ | |EM-D5-16a | ||
+ | |M5 25.4mm spacer (thick) | ||
+ | |nylon | ||
+ | | | ||
+ | | | ||
+ | |- | ||
+ | !colspan="6"|''Fasteners'' | ||
+ | |- | ||
+ | | +18 | ||
+ | |EM-W5 | ||
+ | |M5 washer (form A) | ||
+ | |stainless steel | ||
+ | |SM-H03 | ||
+ | |Includes some spares | ||
+ | |- | ||
+ | | +12 | ||
+ | |EM-W5B | ||
+ | |M5 washer (form B) | ||
+ | |stainless steel | ||
+ | | | ||
+ | |Includes some spares | ||
+ | |- | ||
+ | | +4 | ||
+ | |EM-S5-14 | ||
+ | |M5 14mm cap screw | ||
+ | |stainless steel | ||
+ | | | ||
+ | | | ||
+ | |- | ||
+ | |−4 | ||
+ | |EM-S5-55 | ||
+ | |M5 55mm cap screw | ||
+ | |stainless steel | ||
+ | | | ||
+ | |needed only for single X | ||
+ | |- | ||
+ | |−2 | ||
+ | |EM-S5-70 | ||
+ | |M5 70mm cap screw | ||
+ | |stainless steel | ||
+ | | | ||
+ | |needed only for single X | ||
+ | |- | ||
+ | |6 | ||
+ | |EM-S5-90 | ||
+ | |M5 90mm cap screw | ||
+ | |stainless steel | ||
+ | | | ||
+ | | | ||
+ | |} | ||
+ | |||
+ | The spare washers may be needed for adjustment, or for an alternate configuration | ||
+ | as will be described in the assembly instructions. | ||
+ | |||
+ | In older kits, the dual-X option did not remove the few components needed only for | ||
+ | single X. There would be eight spacers and six screws left over after assembly. | ||
+ | Current kits no longer include these components. |
Latest revision as of 16:22, 14 July 2014
This list is a little out of date and incomplete. It is valid for versions 1.0 and 1.1, but it does not cover all the options available in version 1.1.
Here's an up-to-date packing list for version 1.2 (the current version).
Here's the same type of list for version 1.1.
Dual-Y option
This is the extended length kit, with the dual-Y option selected.
Count | Part Number | Part Description | Material | Equivalent Parts | Notes |
---|---|---|---|---|---|
Custom laser-cut parts | |||||
2 | EM-LEP | End plate | 4mm stainless steel | (SM-S02) | |
4 | EM-LMP | Motor mount plate | 2mm stainless steel | (SM-S01) | |
2 | EM-LZP | Z motor mount plate | 2mm stainless steel | (SM-S06) | |
1 | EM-LZS | Z rail shim | 2mm stainless steel | ||
2 | EM-LBA | Belt anchor | 2mm stainless steel | (SM-M05) | |
3 | EM-LBT | Belt tensioner | 4mm aluminium | tap hole M5 | |
12 | EM-LBC | Belt clamp | 1mm stainless steel | ||
2 | EM-LTM | Spindle mount | 12mm steel | (SM-TM1) | |
2 | EM-LTS | Spindle strap | 1.5mm stainless steel | SM-TM2 | |
Linear motion components | |||||
1 | EM-R-250 | 250mm MakerSlide | extruded aluminium | (MKS01-01) | tap end holes M5 (one end) |
1 | EM-R-375 | 375mm MakerSlide | extruded aluminium | MKS01-02 | tap end holes M5 (both ends) |
2 | EM-R-495 | 495mm MakerSlide | extruded aluminium | (MKS01-02) | tap end holes M5 (both ends) |
1 | EM-MLN | Lead nut | machined acetal | SM-M08 | |
8 | EM-MES | Eccentric spacer | stainless steel | MSK01-04, B18001 | |
16 | EM-MW1 | V-wheel sleeve | machined acetal | MSK01-05, B17021 | |
6 | EM-MW2 | Smooth idler wheel sleeve | machined acetal | MSK01-06, B17023 | |
3 | EM-BP5 | 18-tooth MXL pulley 5mm bore | aluminium, polycarbonate | MSK01-09 | |
1 | EM-B-580 | 580mm 6.35mm MXL belt | neoprene, glass fiber, nylon | (MSK01-10) | 6mm or 6.35mm depending on availability |
2 | EM-B-700 | 700mm 6.35mm MXL belt | neoprene, glass fiber, nylon | (MSK01-10) | 6mm or 6.35mm depending on availability |
22 | EM-W5P | 5mm precision washer | stainless steel | MSK01-08 | |
44 | EM-G5 | 5 x 16 x 5mm bearing | chrome steel | MSK01-07 | |
1 | EM-G8F | 7 x 22 x 8mm flanged bearing | carbon steel | (SM-M07) | |
1 | EM-FC5-8 | 5mm to 8mm flexible coupler | aluminium, steel | SM-H12 | |
1 | EM-S8-150R | M8 150mm threaded rod | stainless steel | (SM-H05) | |
Spacers | |||||
9 | EM-W3N | M3 1.58mm washer | nylon | ||
2 | EM-W5N | M5 1.58mm washer | nylon | ||
6 | EM-D3-12 | M3 19.05mm spacer | nylon | ||
8 | EM-D3-15 | M3 23.81mm spacer | nylon | see note for substitution | |
8 | EM-D5-04a | M5 6.35mm spacer (thick) | nylon | (SM-H01) | |
8 | EM-D5-12 | M5 19.05mm spacer | nylon | SM-H02 | for spindle mount |
4 | EM-D5-12a | M5 19.05mm spacer (thick) | nylon | (SM-H02) | for X carriage |
4 | EM-D5-16a | M5 25.4mm spacer (thick) | nylon | ||
Fasteners | |||||
15 | EM-W3 | M3 washer (form A) | stainless steel | SM-H15 | |
4 | EM-S3-6 | M3 6mm cap screw | stainless steel | ||
8 | EM-S3-30 | M3 30mm cap screw | stainless steel | ||
3 | EM-S3-50 | M3 50mm cap screw | stainless steel | SM-H06 | |
38 | EM-N5 | M5 hex nut | stainless steel | SM-H04 | |
4 | EM-N5TI | M5 T-slot insertion nut | steel | SM-H11 | |
122 | EM-W5 | M5 washer (form A) | stainless steel | SM-H03 | |
8 | EM-W5B | M5 washer (form B) | stainless steel | spare; see instructions | |
18 | EM-S5-10 | M5 10mm cap screw | stainless steel | SM-H07 | |
19 | EM-S5-14 | M5 14mm cap screw | stainless steel | ||
2 | EM-S5-18 | M5 18mm cap screw | stainless steel | ||
14 | EM-S5-30 | M5 30mm cap screw | stainless steel | SM-H08 | |
8 | EM-S5-55 | M5 55mm cap screw | stainless steel | SM-H09 | |
4 | EM-S5-70 | M5 70mm cap screw | stainless steel | ||
2 | EM-N8T | M8 hex nut, thin | stainless steel | SM-H10 | |
4 | EM-BKT1 | Angle bracket | zinc-plated steel | ||
8 | EM-WS4-16 | 4mm x 16mm wood screw | zinc-plated steel |
The Equivalent Parts column lists the part number of the equivalent part of the original Shapeoko (in parentheses if the parts are similar in form or function, but not identical). The few Bnnnnn part numbers are Buildlog.net part numbers.
Note that, in early kits, EM-D3-15 (15/16" spacer) was substituted with one EM-D3-12 (3/4" spacer) plus 3 × EM-W3N (1/16" washer) due to long lead time on the EM-D3-15.
Kits delivered before March 2013 have regular nylon spacers (EM-D5-04, EM-D5-12, EM-D5-16) throughout. From March 2013 onwards, X carriage spacers are thicker (EM-D5-04a, EM-D5-12a, EM-D5-16a), for added rigidity.
What is not in the kit:
- Four NEMA17 stepper motors;
- Electronics to drive the motors;
- A waste board to mount the machine on (minimum size: 550mm x 420mm).
Single-Y option
The Single-Y option removes the parts needed to add a second Y motor. Please note that this is not a recommended configuration. Dual-Y drive is strongly recommended. We offer the single Y for those who want to implement their own dual Y drive solution (for example, using a driveshaft rather than two motors).
This is a list of the parts not included in the single-Y configuration.
Count | Part Number | Part Description | Material | Equivalent Parts | Notes |
---|---|---|---|---|---|
Custom laser-cut parts | |||||
−1 | EM-LBT | Belt tensioner | 4mm aluminium | tap hole M5 | |
−4 | EM-LBC | Belt clamp | 1mm stainless steel | ||
Linear motion components | |||||
−2 | EM-MW2 | Smooth idler wheel sleeve | machined acetal | MSK01-06, B17023 | |
−1 | EM-BP5 | 18-tooth MXL pulley 5mm bore | aluminium, polycarbonate | MSK01-09 | |
−1 | EM-B-700 | 700mm 6.35mm MXL belt | neoprene, glass fiber, nylon | (MSK01-10) | 6mm or 6.35mm depending on availability |
−2 | EM-W5P | 5mm precision washer | stainless steel | MSK01-08 | |
−4 | EM-G5 | 5 x 16 x 5mm bearing | chrome steel | MSK01-07 | |
Spacers | |||||
−4 | EM-D3-15 | M3 23.81mm spacer | nylon | see note for substitution | |
Fasteners | |||||
−4 | EM-W3 | M3 washer (form A) | stainless steel | SM-H15 | |
−4 | EM-S3-30 | M3 30mm cap screw | stainless steel | ||
−2 | EM-N5 | M5 hex nut | stainless steel | SM-H04 | |
−6 | EM-W5 | M5 washer (form A) | stainless steel | SM-H03 | |
−4 | EM-S5-10 | M5 10mm cap screw | stainless steel | ||
−1 | EM-S5-14 | M5 14mm cap screw | stainless steel | ||
−2 | EM-S5-30 | M5 30mm cap screw | stainless steel | SM-H08 |
Short Kit
The Original Length option gives you the same length of MakerSlide on Y as on X, which is the standard configuration of the original Shapeoko. The two EM-R-495 are replaced by two more EM-R-375, and the two (or one, if single Y) EM-B-700 by two (or one) additional EM-B-580.
The minimum size of the waste board for the short machine is 430mm x 420mm.
Dual X Kit
This option allows you to build a deeper X carriage with eight V-wheels instead of four, which runs on two back-to-back MakerSlide rails. It gives additional rigidity, and it is a good upgrade to have for a heavy spindle.
The dual-X option with no extra rail includes everything below except the EM-R-375 (375mm MakerSlide), so you need your own rail.
Count | Part Number | Part Description | Material | Equivalent Parts | Notes |
---|---|---|---|---|---|
Linear motion components | |||||
+1 | EM-R-375 | 375mm MakerSlide | extruded aluminium | MKS01-02 | tap end holes M5 (both ends) |
+2 | EM-MES | Eccentric spacer | stainless steel | MSK01-04, B18001 | |
+4 | EM-MW1 | V-wheel sleeve | machined acetal | MSK01-05, B17021 | |
+4 | EM-W5P | 5mm precision washer | stainless steel | MSK01-08 | |
+8 | EM-G5 | 5 x 16 x 5mm bearing | chrome steel | MSK01-07 | |
Spacers | |||||
−4 | EM-D5-04a | M5 6.35mm spacer (thick) | nylon | needed only for single X | |
−4 | EM-D5-12a | M5 19.05mm spacer (thick) | nylon | needed only for single X | |
+8 | EM-D5-16a | M5 25.4mm spacer (thick) | nylon | ||
Fasteners | |||||
+18 | EM-W5 | M5 washer (form A) | stainless steel | SM-H03 | Includes some spares |
+12 | EM-W5B | M5 washer (form B) | stainless steel | Includes some spares | |
+4 | EM-S5-14 | M5 14mm cap screw | stainless steel | ||
−4 | EM-S5-55 | M5 55mm cap screw | stainless steel | needed only for single X | |
−2 | EM-S5-70 | M5 70mm cap screw | stainless steel | needed only for single X | |
6 | EM-S5-90 | M5 90mm cap screw | stainless steel |
The spare washers may be needed for adjustment, or for an alternate configuration as will be described in the assembly instructions.
In older kits, the dual-X option did not remove the few components needed only for single X. There would be eight spacers and six screws left over after assembly. Current kits no longer include these components.