EShapeoko 1.2 Assembly: Gantry

You'll need the (remaining) parts from Pack 7, and the belt anchor plates from Pack 6. If you have a kit with a NEMA23 motor on the X axis, you will find both types of belt anchor in Pack 6; only one pair is needed, depending on how you opted to install your X motor and belt idler wheels.

You also need the assembled X and Y carriages, and the X rail.

Belt on top (configurations A, E, F)

Gantry and X belt anchor for belt on top (shown: NEMA17 config A on X axis, NEMA17 config B on Y axis)

Item	Part Number	Part Description	Count
1	EM-S5-14	M5 14mm cap screw	8
2	EM-W5	M5 washer (form A)	8
3	EM-LBA	Belt anchor	2

INSTRUCTIONS

Belt on the side (configurations B, C, D)

Gantry and X belt anchor for belt on the side (shown: NEMA23 config D on both X and Y axes)

Item	Part Number	Part Description	Count
1	EM-S5-14	M5 14mm cap screw	8
2	EM-W5	M5 washer (form A)	8
3	EM-LBA1	Belt-on-the-side belt anchor	2

INSTRUCTIONS

Go To

• Next step: NEXT STEP
• Previous step: X carriage
• Back to assembly top page