Difference between revisions of "EShapeoko 1.3 Assembly: Z leadscrew"

From Amber Spyglass Ltd
Jump to navigation Jump to search
(Created page with "== Go To == * Next step: Z motor * Previous step: Frame * Back to EShapeoko 1.3 Assembly Instructions|a...")
 
Line 1: Line 1:
 +
'''''Preliminary instructions'''''
 +
 +
You need the parts in Pack 8 and the Z motor mount plate from Pack 6,
 +
with [[EShapeoko_1.3_Assembly:_Prep_work#Tap|two holes tapped M5]].
 +
 +
Identify the one smaller washer in Pack 8, and set it aside. That's part W5D;
 +
the other washers are part W5.
 +
 +
Using the two 8 mm M5 screws (S5-8, shortest in the pack) with one washer each,
 +
attach the bearing block to the motor plate.
 +
 
== Go To ==
 
== Go To ==
 
* Next step: [[EShapeoko 1.3 Assembly: Z motor|Z motor]]
 
* Next step: [[EShapeoko 1.3 Assembly: Z motor|Z motor]]
 
* Previous step: [[EShapeoko 1.3 Assembly: Frame|Frame]]
 
* Previous step: [[EShapeoko 1.3 Assembly: Frame|Frame]]
 
* Back to [[EShapeoko 1.3 Assembly Instructions|assembly top page]]
 
* Back to [[EShapeoko 1.3 Assembly Instructions|assembly top page]]

Revision as of 14:31, 28 January 2016

Preliminary instructions

You need the parts in Pack 8 and the Z motor mount plate from Pack 6, with two holes tapped M5.

Identify the one smaller washer in Pack 8, and set it aside. That's part W5D; the other washers are part W5.

Using the two 8 mm M5 screws (S5-8, shortest in the pack) with one washer each, attach the bearing block to the motor plate.

Go To