Difference between revisions of "EShapeoko 1.3 Assembly: Z leadscrew"

From Amber Spyglass Ltd
Jump to navigation Jump to search
 
(One intermediate revision by the same user not shown)
Line 1: Line 1:
 
'''''Preliminary instructions'''''
 
'''''Preliminary instructions'''''
  
You need the parts in Pack 8 and the Z motor mount plate from Pack 6,
+
You need some the parts in Pack 8, and the Z motor mount plate from Pack 6,
 
with [[EShapeoko_1.3_Assembly:_Prep_work#Tap|two holes tapped M5]].
 
with [[EShapeoko_1.3_Assembly:_Prep_work#Tap|two holes tapped M5]].
  
Line 7: Line 7:
 
the other washers are part W5.
 
the other washers are part W5.
  
Using the two 8 mm M5 screws (S5-8, shortest in the pack) with one washer each,
+
Using the two 8 mm M5 screws (S5-8, shortest in the pack) with one washer (W5) each,
attach the bearing block to the motor plate.
+
attach the bearing block (G8K) to the motor plate (LZP2 or LZP3).
  
 
== Go To ==
 
== Go To ==

Latest revision as of 14:48, 28 January 2016

Preliminary instructions

You need some the parts in Pack 8, and the Z motor mount plate from Pack 6, with two holes tapped M5.

Identify the one smaller washer in Pack 8, and set it aside. That's part W5D; the other washers are part W5.

Using the two 8 mm M5 screws (S5-8, shortest in the pack) with one washer (W5) each, attach the bearing block (G8K) to the motor plate (LZP2 or LZP3).

Go To