Difference between revisions of "EShapeoko 1.3 Assembly: Z leadscrew"

From Amber Spyglass Ltd
Jump to navigation Jump to search
Line 1: Line 1:
 
'''''Preliminary instructions'''''
 
'''''Preliminary instructions'''''
  
You need the parts in Pack 8 and the Z motor mount plate from Pack 6,
+
You need some the parts in Pack 8, and the Z motor mount plate from Pack 6,
 
with [[EShapeoko_1.3_Assembly:_Prep_work#Tap|two holes tapped M5]].
 
with [[EShapeoko_1.3_Assembly:_Prep_work#Tap|two holes tapped M5]].
  

Revision as of 13:40, 28 January 2016

Preliminary instructions

You need some the parts in Pack 8, and the Z motor mount plate from Pack 6, with two holes tapped M5.

Identify the one smaller washer in Pack 8, and set it aside. That's part W5D; the other washers are part W5.

Using the two 8 mm M5 screws (S5-8, shortest in the pack) with one washer each, attach the bearing block to the motor plate.

Go To