EShapeoko 1.4 Assembly: V-wheels
The parts for this step are in Packs 1 and 2. Make sure you use the precision washers (EM-W5Pa) from Pack 1, not ordinary washers from other packs.
|Item||Part Number||Part Description||Count|
|For each wheel|
|2||G5||5 × 16 × 5 mm bearing||2|
|3||W5Pa||5 mm precision washer||1|
Lay one bearing on a flat surface. Push a V-wheel sleeve over it. The parts are designed to force-fit, so push firmly straight down. Thread this on a long M5 bolt, bearing side first, followed by a precision washer and the second bearing. Place the second bearing on a flat surface, and push the V-wheel sleeve over it too. Make sure both bearings are in as far as they will go. Remove the bolt.
If the V-wheel does not rotate smoothly, see Troubleshooting.
Repeat 20 times.