Difference between revisions of "Dual-bearing V-wheel Assembly"

@@ Line 1: / Line 1: @@
-[[File:EShapeOko_assembly_step_01_V-wheel_1.png]]
-{| class="wikitable"
-  |-
-    !Item
-    !Part Number
-    !Part Description
-    !Count
-  |-
-    !colspan="4"|''For each wheel''
-  |-
-    |1
-    |EM-MW1
-    |V-wheel sleeve
-    |1
-  |-
-    |2
-    |EM-G5
-    |5 x 16 x 5mm bearing
-    |2
-  |-
-    |3
-    |EM-W5P
-    |5mm precision washer
-    |1
-|}
-Lay one bearing on a flat surface. Push a V-wheel sleeve over it.
-The parts are designed to force-fit, so push firmly straight down.
-Thread this on a long M5 bolt, bearing side first, followed by a
-precision washer and the second bearing.  Place the second bearing
-on a flat surface, and push the V-wheel sleeve over it too.  Make
-sure both bearings are in as far as they will go.  Remove the bolt.
-[[File:EShapeOko_assembly_step_01_V-wheel_2.png]]
-Please see [[V-wheel and Idler Assembly Instructions#Troubleshooting]]
-if the wheels don't rotate smoothly.

Latest revision as of 17:04, 2 October 2013