Difference between revisions of "EShapeoko 1.2 Assembly: X carriage"

From Amber Spyglass Ltd
Jump to navigation Jump to search
Line 8: Line 8:
 
[[File:EShapeoko 1.2 assembly X carriage rear.png|frame|none|Rear of the X carriage]]
 
[[File:EShapeoko 1.2 assembly X carriage rear.png|frame|none|Rear of the X carriage]]
  
−
PARTS TABLE
+
{| class="wikitable"
 +
  |-
 +
    !Item
 +
    !Part Number
 +
    !Part Description
 +
    !Count
 +
  |-
 +
    |6
 +
    |
 +
    |Assembled V-wheel
 +
    |12
 +
  |-
 +
    |1
 +
    |EM-S5-70
 +
    |M5 70mm cap screw
 +
    |2
 +
  |-
 +
    |2
 +
    |EM-S5-90
 +
    |M5 90mm cap screw
 +
    |6
 +
  |-
 +
    |3
 +
    |EM-W5
 +
    |M5 washer (form A)
 +
    |48
 +
  |-
 +
    |4
 +
    |EM-MES
 +
    |Eccentric spacer
 +
    |6
 +
  |-
 +
    |5
 +
    |EM-W5B
 +
    |M5 washer (form B)
 +
    |8
 +
  |-
 +
    |7
 +
    |EM-D5-16a
 +
    |M5 25.4mm spacer (thick)
 +
    |12
 +
  |-
 +
    |8
 +
    |EM-D5-04a
 +
    |M5 6.35mm spacer (thick)
 +
    |2
 +
  |-
 +
    |9
 +
    |EM-LMP
 +
    |Motor plate
 +
    |1
 +
  |-
 +
    |10
 +
    |EM-N5
 +
    |M5 hex nut
 +
    |8
 +
  |-
 +
    |11
 +
    |
 +
    |Assembled rear X motor plate
 +
    |1
 +
|}
 +
 
 
[[File:EShapeoko 1.2 assembly X and Z V-wheels hole positions.png|frame|right|x165px|Position of V-wheels on the X carriage, as seen from the front (red: fixed X V-wheels; blue: adjustable X V-wheels; yellow: fixed Z V-wheels; purple: adjustable Z V-wheels)]]
 
[[File:EShapeoko 1.2 assembly X and Z V-wheels hole positions.png|frame|right|x165px|Position of V-wheels on the X carriage, as seen from the front (red: fixed X V-wheels; blue: adjustable X V-wheels; yellow: fixed Z V-wheels; purple: adjustable Z V-wheels)]]
  

Revision as of 13:49, 2 July 2014

For this step, you will need the fourth motor plate, the rear X motor plate with the motor and idlers attached from two steps ago, and the remaining parts in Pack 5.

Take a deep breath...

Front and middle of the X carriage
Rear of the X carriage
Item Part Number Part Description Count
6 Assembled V-wheel 12
1 EM-S5-70 M5 70mm cap screw 2
2 EM-S5-90 M5 90mm cap screw 6
3 EM-W5 M5 washer (form A) 48
4 EM-MES Eccentric spacer 6
5 EM-W5B M5 washer (form B) 8
7 EM-D5-16a M5 25.4mm spacer (thick) 12
8 EM-D5-04a M5 6.35mm spacer (thick) 2
9 EM-LMP Motor plate 1
10 EM-N5 M5 hex nut 8
11 Assembled rear X motor plate 1
Position of V-wheels on the X carriage, as seen from the front (red: fixed X V-wheels; blue: adjustable X V-wheels; yellow: fixed Z V-wheels; purple: adjustable Z V-wheels)

INSTRUCTIONS

Part 5 (shown in orange) is EM-W5B (form B M5 washer), which is thinner (0.75 mm) than the regular washers (0.95 mm). The thinner washers are packed in a separate bag, because they are otherwise hard to tell apart (they are not painted orange in real life). It is important to get the spacing of the X V-wheels exactly right, to match the distance between the Vs of the MakerSlide, so please be careful to use the correct washers.

LINKS

Retrieved from "http://amberspyglass.co.uk/w/index.php?title=EShapeoko_1.2_Assembly:_X_carriage&oldid=431"