EShapeoko 1.0 and 1.1 Assembly Instructions
Step 1: Assemble the V-wheels
| Item | Count | Part Number | Part Description |
|---|---|---|---|
| For each wheel | |||
| 1 | 1 | EM-MW1 | V-wheel sleeve |
| 2 | 2 | EM-G5 | 5 x 16 x 5mm bearing |
| 3 | 1 | EM-W5P | 5mm precision washer |
Lay one bearing on a flat surface. Push a V-wheel sleeve over it. The parts are designed to force-fit, so push firmly straight down. Thread this on a long M5 bolt, bearing side first, followed by a precision washer and the second bearing. Place the second bearing on a flat surface, and push the V-wheel sleeve over it too. Make sure both bearings are all the way in. Remove the bolt.
Repeat 16 times (20 if you have the dual-X upgrade).
Step 2: Assemble the smooth idler wheels
| Item | Count | Part Number | Part Description |
|---|---|---|---|
| For each wheel | |||
| 1 | 1 | EM-MW2 | Smooth idler wheel sleeve |
| 2 | 2 | EM-G5 | 5 x 16 x 5mm bearing |
| 3 | 1 | EM-W5P | 5mm precision washer |
Lay one bearing on a flat surface. Push an idler wheel sleeve over it (lip up, of course). The parts are designed to force-fit, so push firmly straight down. Thread this on a long M5 bolt, lip side first, followed by a precision washer and the second bearing. Place the second bearing on a flat surface, and push the idler wheel sleeve over it too. Make sure the bearings are all the way in. Remove the bolt.
Repeat 6 times.
Step 3: Mount the V-wheels on the right Y panel
