Difference between revisions of "EShapeoko 1.2 Assembly: X carriage"
Jump to navigation
Jump to search
Line 15: | Line 15: | ||
!Part Description | !Part Description | ||
!Count | !Count | ||
− | |||
− | |||
− | |||
− | |||
− | |||
|- | |- | ||
|1 | |1 | ||
Line 45: | Line 40: | ||
|M5 washer (form B) | |M5 washer (form B) | ||
|8 | |8 | ||
+ | |- | ||
+ | |6 | ||
+ | | | ||
+ | |Assembled V-wheel | ||
+ | |12 | ||
|- | |- | ||
|7 | |7 |
Revision as of 13:51, 2 July 2014
For this step, you will need the fourth motor plate, the rear X motor plate with the motor and idlers attached from two steps ago, and the remaining parts in Pack 5.
Take a deep breath...
Item | Part Number | Part Description | Count |
---|---|---|---|
1 | EM-S5-70 | M5 70mm cap screw | 2 |
2 | EM-S5-90 | M5 90mm cap screw | 6 |
3 | EM-W5 | M5 washer (form A) | 48 |
4 | EM-MES | Eccentric spacer | 6 |
5 | EM-W5B | M5 washer (form B) | 8 |
6 | Assembled V-wheel | 12 | |
7 | EM-D5-16a | M5 25.4mm spacer (thick) | 12 |
8 | EM-D5-04a | M5 6.35mm spacer (thick) | 2 |
9 | EM-LMP | Motor plate | 1 |
10 | EM-N5 | M5 hex nut | 8 |
11 | Assembled rear X motor plate | 1 |
INSTRUCTIONS
Part 5 (shown in orange) is EM-W5B (form B M5 washer), which is thinner (0.75 mm) than the regular washers (0.95 mm). The thinner washers are packed in a separate bag, because they are otherwise hard to tell apart (they are not painted orange in real life). It is important to get the spacing of the X V-wheels exactly right, to match the distance between the Vs of the MakerSlide, so please be careful to use the correct washers.
LINKS