Hardware

£0.00

£ GBP

JavaScript is required by this website. Please enable this in your browser settings.

Motor bracket
This is a motor bracket, very similar to the ones used for the Z axis motors in the ORD Bot. It can be attached to MakerSlide (usually with an idler bracket at the opposite e…

£4.25

Motor bracket

£4.25
Precision shim washer for MakerSlide V-wheel
This is a stainless steel precision washer for dual-bearing V-wheels and idler wheels. It is nominally 1.00 mm thick, 5.00 mm inner diameter, 7.70 mm outer diameter (actual m…

£0.30

Precision shim washer for…

£0.30
Screw drive kit for M8 threaded rod, both ends supported
This is a kit that allows a MakerSlide carriage to be driven by an M8 threaded rod, supported at both ends. It includes hardware to attach a NEMA17 stepper motor, a M8-thread…

£24.85

Screw drive kit for M8…

£24.85
Screw, 1/4", for camera, tripod head, or quick-release plate
This is a 1/4 inch screw that can be used to attach cameras, camera mount plates or ball heads to the camera slider. You can use any of the available holes for eccentric s…

£1.95

Screw, 1/4", for camera,…

£1.95
Screw, 3/8", for camera, tripod head, or quick-release plate
This is a 3/8 inch screw that can be used to attach camera mount plates or ball heads to the camera slider. You'll need to drill a hole in the carriage plate (or enlarge …

£2.45

Screw, 3/8", for camera,…

£2.45
Screws for DC brushless fan, pack of 4
This is a pack of four screws for mounting our 50mm DC brushless fan, and/or its fan guard. They are compatible with other sizes of fan, as long as they have 4 mm diameter…

£0.85

Screws for DC brushless fan, pack of 4

£0.85
Set of aluminium spacers for Dual-X eShapeoko
These high-quality aluminium alloy spacers are perfect for replacing the nylon spacers in the eShapeOko X carriage, to make it stiffer. The set includes twelve 25.4 mm spacers (…

£7.95

Set of aluminium spacers for…

£7.95
Spacer, aluminium, 25.4mm (1 inch), 5.1mm bore
This high-quality aluminium alloy spacer is perfect for replacing the nylon spacers in the eShapeoko dual-X carriage, to make it stiffer. Useful everywhere a nylon spacer is …

£0.59

Spacer, aluminium, 25.4mm (1…

£0.59
Spacer, aluminium, 6.35mm (0.25 inch), 5.1mm bore
This high-quality aluminium alloy spacer is perfect for replacing the nylon spacers in the eShapeOko X carriage, to make it stiffer. Useful everywhere a nylon spacer is not t…

£0.45

Spacer, aluminium, 6.35mm…

£0.45
T-slot insertion nuts for MakerSlide, M3 thread, pack of 10
This is a set of 10 T-slot insertion nuts for MakerSlide and similar T-slot profiles, such as the Misumi HFS5 series. They accept M3 screws. Part number: EM-N3TI (eSha…

£3.50

T-slot insertion nuts for…

£3.50
T-slot insertion nuts for MakerSlide, M5 thread, pack of 10
This is a set of 10 T-slot insertion nuts for MakerSlide and similar T-slot profiles, such as the Misumi HFS5 series. They accept M5 screws. Part number: EM-N5TI (eShapeOk…

£3.50

T-slot insertion nuts for…

£3.50
Trapezoidal leadscrew, Tr8x2, 175mm
This is the leadscrew from the eShapeoko kit. It is stainless steel, threaded Tr 8 x 2 ("metric acme"), 175 mm long. One end is turned down to 5 mm diameter for a leng…

£21.00

Trapezoidal leadscrew, Tr8x2, 175mm

£21.00