Hardware

£0.00

£ GBP

JavaScript is required by this website. Please enable this in your browser settings.

20mm×40mm T-slot aluminium extrusion, 1060mm
Standard T-slot aluminium extrusion with 20 mm unit and 6 mm wide, 6 mm deep T-slots. This is 20 mm by 40 mm. It has one T-slot on the narrow faces and two T-slots on the wide face…

£13.20

20mm×40mm T-slot aluminium…

£13.20
20mm×40mm T-slot aluminium extrusion, 1420mm
Standard T-slot aluminium extrusion with 20 mm unit and 6 mm wide, 6 mm deep T-slots. This is 20 mm by 40 mm. It has one T-slot on the narrow faces and two T-slots on the wide face…

£16.98

20mm×40mm T-slot aluminium…

£16.98
20mm×40mm T-slot aluminium extrusion, 435mm
Standard T-slot aluminium extrusion with 20 mm unit and 6 mm wide, 6 mm deep T-slots. This is 20 mm by 40 mm. It has one T-slot on the narrow faces and two T-slots on the wide face…

£6.00

20mm×40mm T-slot aluminium…

£6.00
20mm×40mm T-slot aluminium extrusion, 560mm
Standard T-slot aluminium extrusion with 20 mm unit and 6 mm wide, 6 mm deep T-slots. This is 20 mm by 40 mm. It has one T-slot on the narrow faces and two T-slots on the wide face…

£7.74

20mm×40mm T-slot aluminium…

£7.74
20mm×40mm T-slot aluminium extrusion, 670mm
Standard T-slot aluminium extrusion with 20 mm unit and 6 mm wide, 6 mm deep T-slots. This is 20 mm by 40 mm. It has one T-slot on the narrow faces and two T-slots on the wide face…

£9.00

20mm×40mm T-slot aluminium…

£9.00
20mm×40mm T-slot aluminium extrusion, 810mm
Standard T-slot aluminium extrusion with 20 mm unit and 6 mm wide, 6 mm deep T-slots. This is 20 mm by 40 mm. It has one T-slot on the narrow faces and two T-slots on the wide face…

£10.50

20mm×40mm T-slot aluminium…

£10.50
20mm×40mm T-slot aluminium extrusion, 920mm
Standard T-slot aluminium extrusion with 20 mm unit and 6 mm wide, 6 mm deep T-slots. This is 20 mm by 40 mm. It has one T-slot on the narrow faces and two T-slots on the wide face…

£11.70

20mm×40mm T-slot aluminium…

£11.70
Basic MakerSlide kit (manual camera slider)
The 1500 mm and 2000 mm versions will be back in stock on 19 March 2020 This is a basic MakerSlide slider. It consists of the MakerSlide rail, a …

£30.95

Basic MakerSlide kit (manual…

£30.95
Belt anchors, buckle type, set of 2
This is a pair of belt anchors (one for each end of a belt) suitable for up to 6.35 mm (0.25") wide rubber belt (MXL, GT2 etc). They work much like a belt buckle. …

£4.50

Belt anchors, buckle type, set of 2

£4.50
Belt anchors, slot type, belt on the outside, set of 2
This is a set of two EM-LBA1 belt anchor plates, made of 2 mm stainless steel. They bolt to the ends of a piece of MakerSlide rail, and serve as anchors for the ends of an op…

£4.25

Belt anchors, slot type, belt…

£4.25
Belt anchors, slot type, belt on top of rail, set of 2
This is a set of two EM-LBA belt anchor plates, made of 2 mm stainless steel. They bolt to the ends of a piece of MakerSlide rail, and serve as anchors for the ends of an ope…

£4.25

Belt anchors, slot type, belt…

£4.25
Belt pulley, 16 tooth, 5mm bore, for GT2 belt
An all-aluminium timing belt pulley for GT2 belt (2 mm pitch) 6 mm wide (up to 6.35 mm wide). This pulley has 16 teeth and a 5 mm bore. This is the shaft diameter of a…

£5.45

Belt pulley, 16 tooth, 5mm…

£5.45