Shapeoko Upgrades

£0.00

£ GBP

JavaScript is required by this website. Please enable this in your browser settings.

20mm×40mm T-slot aluminium extrusion, 1060mm
Standard T-slot aluminium extrusion with 20 mm unit and 6 mm wide, 6 mm deep T-slots. This is 20 mm by 40 mm. It has one T-slot on the narrow faces and two T-slots on the wide face…

£13.20

20mm×40mm T-slot aluminium…

£13.20
20mm×40mm T-slot aluminium extrusion, 1420mm
Standard T-slot aluminium extrusion with 20 mm unit and 6 mm wide, 6 mm deep T-slots. This is 20 mm by 40 mm. It has one T-slot on the narrow faces and two T-slots on the wide face…

£16.98

20mm×40mm T-slot aluminium…

£16.98
20mm×40mm T-slot aluminium extrusion, 435mm
Standard T-slot aluminium extrusion with 20 mm unit and 6 mm wide, 6 mm deep T-slots. This is 20 mm by 40 mm. It has one T-slot on the narrow faces and two T-slots on the wide face…

£6.00

20mm×40mm T-slot aluminium…

£6.00
20mm×40mm T-slot aluminium extrusion, 560mm
Standard T-slot aluminium extrusion with 20 mm unit and 6 mm wide, 6 mm deep T-slots. This is 20 mm by 40 mm. It has one T-slot on the narrow faces and two T-slots on the wide face…

£7.74

20mm×40mm T-slot aluminium…

£7.74
20mm×40mm T-slot aluminium extrusion, 670mm
Standard T-slot aluminium extrusion with 20 mm unit and 6 mm wide, 6 mm deep T-slots. This is 20 mm by 40 mm. It has one T-slot on the narrow faces and two T-slots on the wide face…

£9.00

20mm×40mm T-slot aluminium…

£9.00
20mm×40mm T-slot aluminium extrusion, 810mm
Standard T-slot aluminium extrusion with 20 mm unit and 6 mm wide, 6 mm deep T-slots. This is 20 mm by 40 mm. It has one T-slot on the narrow faces and two T-slots on the wide face…

£10.50

20mm×40mm T-slot aluminium…

£10.50
20mm×40mm T-slot aluminium extrusion, 920mm
Standard T-slot aluminium extrusion with 20 mm unit and 6 mm wide, 6 mm deep T-slots. This is 20 mm by 40 mm. It has one T-slot on the narrow faces and two T-slots on the wide face…

£11.70

20mm×40mm T-slot aluminium…

£11.70
Ball bearings for MakerSlide V-wheels and belt idlers, set of 8
This is a set of eight precision miniature deep-groove ball bearings, greased and shielded with rubber shields, type 625-2RS, made of corrosion-resistant chrome steel. They ar…

£3.95

Ball bearings for MakerSlide…

£3.95
Belt anchors, buckle type, set of 2
This is a pair of belt anchors (one for each end of a belt) suitable for up to 6.35 mm (0.25") wide rubber belt (MXL, GT2 etc). They work much like a belt buckle. …

£4.50

Belt anchors, buckle type, set of 2

£4.50
Belt anchors, slot type, belt on the outside, set of 2
This is a set of two EM-LBA1 belt anchor plates, made of 2 mm stainless steel. They bolt to the ends of a piece of MakerSlide rail, and serve as anchors for the ends of an op…

£4.25

Belt anchors, slot type, belt…

£4.25
Belt anchors, slot type, belt on top of rail, set of 2
This is a set of two EM-LBA belt anchor plates, made of 2 mm stainless steel. They bolt to the ends of a piece of MakerSlide rail, and serve as anchors for the ends of an ope…

£4.25

Belt anchors, slot type, belt…

£4.25
Belt clamps, set of 2
This is a pair of belt clamps (one for each end of the belt). They are suitable for up to 6.35mm (1/4") wide belt. Unlike other mehtods (such as insertion nuts and zi…

£2.20

Belt clamps, set of 2

£2.20