Shapeoko Upgrades

£0.00

£ GBP

JavaScript is required by this website. Please enable this in your browser settings.

eShapeoko motor mounting plate (EM-LMP)
This is a single eShapeoko motor plate. The eShapeoko includes four of thse: two Y carriages (one at each end of the gantry), and two that make up the X carriage.

£7.90

eShapeoko motor mounting plate…

£7.90
eShapeoko X and Y axis NEMA 23 upgrade
If you have an eShapeoko with NEMA 17 motors on the X and Y axis, and would like to upgrade to NEMA 23 motors, this is the kit you need. It includes M5 fasteners and spacers,…

£24.45

eShapeoko X and Y axis NEMA 23 upgrade

£24.45
eShapeoko Z axis NEMA 23 upgrade
If you have an eShapeoko with a NEMA 17 motor on the Z axis and would like to upgrade that to a NEMA 23 motor, this is the kit you need. It includes M5 fasteners and spacers,…

£13.45

eShapeoko Z axis NEMA 23 upgrade

£13.45
Flexible coupler, 5mm to 5mm
A flexible coupler with a 5 mm bores on both sides, ideal for connecting a NEMA17 motor to a 5 mm diameter shaft. Usually, flexible couplers have either a set screw, or a slit t…

£4.75

Flexible coupler, 5mm to 5mm

£4.75
Flexible coupler, 5mm to 6.35mm (1/4")
A flexible coupler with a 5 mm bore on one side and 6.35 mm (0.25 in) on the other side. Usually, flexible couplers have either a set screw, or a slit that forms two jaws that c…

£4.95

Flexible coupler, 5mm to 6.35mm (1/4")

£4.95
Flexible coupler, 5mm to 8mm
A flexible coupler with a 5 mm bore on one side and 8 mm on the other side, ideal for connecting a NEMA17 motor to a M8 threaded rod, for example for the Z axis of an eShapeOko CNC…

£4.75

Flexible coupler, 5mm to 8mm

£4.75
Flexible coupler, 6.35mm (1/4 inch) to 6.35mm
A flexible coupler with 6.35 mm (1/4 inch) bores on both sides, ideal for connecting a NEMA23 motor (or one of the rare NEMA17 motors with 6.35 mm shafts) to a 6.35 mm (1/4") …

£4.75

Flexible coupler, 6.35mm (1/4…

£4.75
Flexible coupler, 6.35mm (1/4 inch) to 8mm
A flexible coupler with a 6.35 mm (1/4 inch) bore on one side and 8 mm on the other side, ideal for connecting a NEMA23 motor (or one of the rare NEMA17 motors with 6.35 mm shafts)…

£4.95

Flexible coupler, 6.35mm (1/4…

£4.95
Flexible coupler, 8mm to 8mm
A flexible coupler with 8 mm bores on both sides. Usually, flexible couplers have either a set screw, or a slit that forms two jaws that can be tightened with a screw. Thi…

£4.95

Flexible coupler, 8mm to 8mm

£4.95
Limit and Homing Microswitch
One miniature snap-action microswitch with pin plunger. Includes mounting hardware (not pictured): two M2 × 14 mm hex socket cap screws, four M2 washers, two M2 hex nuts…

£1.00

Limit and Homing Microswitch

£1.00
Mid-span Y-axis supports for eShapeoko (and Shapeoko 1)
This is a set of two mid-span supports for the Y rails of an eShapeoko (or Shapeoko 1). Please note that due to different dimensions, they are not compatible with the Shapeok…

£10.95

Mid-span Y-axis supports for…

£10.95
Open end plates for eShapeoko (and Shapeoko 1)
Please note that the current design is slightly different. One of the top corners is cut out. This is to reduce shipping weight, so that a set is just under 1 kg, inste…

£18.95

Open end plates for eShapeoko…

£18.95