Hardware

£0.00

£ GBP

JavaScript is required by this website. Please enable this in your browser settings.

eShapeoko motor mounting plate (EM-LMP)
This is a single eShapeoko motor plate. The eShapeoko includes four of thse: two Y carriages (one at each end of the gantry), and two that make up the X carriage.

£7.90

eShapeoko motor mounting plate…

£7.90
Fan guard for 50mm fan
This is a fan guard for our small DC brushless fan. You may also need the screws for it.

£1.05

Fan guard for 50mm fan

£1.05
Flexible coupler, 5mm to 5mm
A flexible coupler with a 5 mm bores on both sides, ideal for connecting a NEMA17 motor to a 5 mm diameter shaft. Usually, flexible couplers have either a set screw, or a slit t…

£4.75

Flexible coupler, 5mm to 5mm

£4.75
Flexible coupler, 5mm to 6.35mm (1/4")
A flexible coupler with a 5 mm bore on one side and 6.35 mm (0.25 in) on the other side. Usually, flexible couplers have either a set screw, or a slit that forms two jaws that c…

£4.95

Flexible coupler, 5mm to 6.35mm (1/4")

£4.95
Flexible coupler, 5mm to 8mm
A flexible coupler with a 5 mm bore on one side and 8 mm on the other side, ideal for connecting a NEMA17 motor to a M8 threaded rod, for example for the Z axis of an eShapeOko CNC…

£4.75

Flexible coupler, 5mm to 8mm

£4.75
Flexible coupler, 6.35mm (1/4 inch) to 6.35mm
A flexible coupler with 6.35 mm (1/4 inch) bores on both sides, ideal for connecting a NEMA23 motor (or one of the rare NEMA17 motors with 6.35 mm shafts) to a 6.35 mm (1/4") …

£4.75

Flexible coupler, 6.35mm (1/4…

£4.75
Flexible coupler, 6.35mm (1/4 inch) to 8mm
A flexible coupler with a 6.35 mm (1/4 inch) bore on one side and 8 mm on the other side, ideal for connecting a NEMA23 motor (or one of the rare NEMA17 motors with 6.35 mm shafts)…

£4.95

Flexible coupler, 6.35mm (1/4…

£4.95
Flexible coupler, 8mm to 8mm
A flexible coupler with 8 mm bores on both sides. Usually, flexible couplers have either a set screw, or a slit that forms two jaws that can be tightened with a screw. Thi…

£4.95

Flexible coupler, 8mm to 8mm

£4.95
Hardware for eShapeoko belt configurations E and F
This is a kit of all the parts needed to install two NEMA23 motors on the Y axis of an eShapeoko in belt configurations E and F (NEMA23 motors with belts on top of the rail). …

£6.15

Hardware for eShapeoko belt…

£6.15
Lead nut, M8x1.25, rectangular
This is the lead nut used for the eShapeoko Z axis (when using the M8 threaded rod). It is made of black acetal (Delrin). It has one M8 x 1.25 hole (for the threaded…

£4.50

Lead nut, M8x1.25, rectangular

£4.50
Lead nut, Tr8x2, rectangular
This is the lead nut used for the eShapeoko Z axis (when using the Tr 8 x 2 trapezoidal screw). It is made of black acetal (Delrin). It has one Tr 8 x 2 hole (for the leadscrew) an…

£4.50

Lead nut, Tr8x2, rectangular

£4.50
Limit and Homing Microswitch
One miniature snap-action microswitch with pin plunger. Includes mounting hardware (not pictured): two M2 × 14 mm hex socket cap screws, four M2 washers, two M2 hex nuts…

£1.00

Limit and Homing Microswitch

£1.00